## What does a heating curve show?

A heating curve graphically represents the phase transitions that a substance undergoes as heat is added to it. The plateaus on the curve mark the phase changes. The temperature remains constant during these phase transitions.

You are watching: Which of the following is true for a heating curve?

## Is a heating curve exothermic or endothermic?

On any heating curve, energy is added and therefore it is always endothermic. True or False: On any cooling curve, energy is released and therefore it is always exothermic.

## What is the difference between a heating curve and a cooling curve?

Heating curves show how the temperature changes as a substance is heated up. Cooling curves are the opposite. They show how the temperature changes as a substance is cooled down. Just like heating curves, cooling curves have horizontal flat parts where the state changes from gas to liquid, or from liquid to solid.

## What is the difference between heating curve and phase diagram?

While a heating curve provides information on the phase changes at a single pressure, the phase diagram depicts the phase changes at all temperatures and pressures. One of these phase changes is vaporization, which is an endothermic process that transforms a liquid to a gas.

## Which phase of water will have the lowest temperature change upon heating when the same amount of heat is applied to each?

liquid phase

## How do you calculate heat energy needed?

To calculate the energy required to raise the temperature of any given substance, here’s what you require:

The mass of the material, m.The temperature change that occurs, ΔT.The specific heat capacity of the material, c (which you can look up). Here is a source of values of c for different substances:Q=m×c×ΔT.## How many BTUs Do I need to boil water?

You have all heard of the BTU of heat energy (British Thermal Unit), it takes one BTU to raise one pound of water one degree Fahrenheit. So if the water in the pan on the stove is put in at 32°F, it will then require 180 BTU’s to bring the water to boiling temperature, or 212°F.

## How many BTUs does it take to heat a 1000 square foot house?

Calculating the number of BTUs needed to heat an area For example, a 300 square foot room typically requires 7,000 BTUs to maintain a comfortable temperature, while a 1,000 square foot room requires 18,000 BTUs.

## How many BTUs do I need to heat 4000 square feet?

Chart of Recommended Heating BTU Per Square Foot

Room/Area Size:Examples:Ave. Recommended BTU:100-200 sq ft | Small den or office | 4,000-8,000 BTU |

200-300 sq ft | Den, office, small bedroom | 7,BTU |

300-400 sq ft | Efficiency apartment | 12,000-18,000 BTU |

400-500 sq ft | Studio/1-bedroom apartment, Tiny house | 000 BTU |

## How long is 1000 sqft?

The square footage of a square or rectangular space can be determined by multiplying the width of the space by the length of the space. For example, a room that is 50 feet long and 20 feet wide could occupy 1,000 square feet.

## What size furnace do you need for a 1200 sq ft house?

A 1,200-square-foot home will require between 35,000 and 75,000 BTUs.

## How many square feet does a 60000 BTU furnace heat?

A standard that is used by heating and cooling equipment companies is to provide at least 25 to 30 Btu of heat per square feet in the home for a moderate to warm climate. A mid-sized home of 2,000 square feet would need approximately 50,000 to 60,000 Btu to heat it properly.

## How many square feet will a 75000 BTU furnace heat?

A 75,000 BTU heater can heat a room of between 1,900 and 3,700 square feet in a cold climate if there is little to no insulation. In more temperate climates the heater fares better, heating an uninsulated room of any size from 2,400 to 4,600 square feet.

## How much does a 60000 BTU furnace cost?

Natural Gas Heating System Prices by BTU

Furnace Size (BTU)Typical Furnace Cost with Installation*60,000 | $2,500 – $4,200 |

75,000 | $2,700 – $4,600 |

80,000 | $3,000 – $4,900 |

100,000 | $3,400 – $5,400 |

## What are the worst furnaces?

Furnace Brands to Avoid Due to Quality Ratings and Owner Reviews

Arcoaire (2.2 average rating)Buderus (1.7 average Rating)Burnham Furnaces (1.8 average Rating)Ducane (2.3 average rating)Evcon (2.2 average rating)Keepright (2.4 average rating)Tempstar (2.5 average rating)Weatherking (2.4 average rating)## Is a 96 furnace worth the extra money?

But coming back to that, a 96% AFUE gas furnace is one of the most efficient furnaces on the market. If your utility is offering an efficiency rebate on gas technology, a 96% AFUE gas furnace will almost certainly qualify. So always, always check with your utility company before you buy.

## What is the most reliable furnace brand?

Best Furnace Brands

Daikin Furnaces.Goodman Gas Furnaces.Lennox Furnace Units.Rheem Furnaces.Ruud Furnace Units.Trane Gas Furnaces.York Furnace Units.HEIL Gas Furnaces.## Should I buy 80 or 95% efficiency furnace?

A standard efficiency furnace provides 80% annual fuel utilization efficiency (AFUE). In this type of furnace, 20% of the energy produced by natural gas is expelled as exhaust. High efficiency furnaces offer 90% or more AFUE. So a 95% furnace is more efficient than an 80% furnace.

## Is Daikin better than Lennox?

Looking at the specs the Lennox appears better: a bit quieter and higher quality construction. But the Daikin system has a better warranty and is about x$ cheaper.

See more: 25% Of 250,000 - What Is 25 Percent Of 250000

## What is the best type of furnace to buy?

Best Furnaces

Rheem Prestige and Ruud Ultra Series are the best. The series has two modulating furnaces (modulating gas valves) and three 2-stage furnaces. Ruud Achiever Plus and Rheem Classic Plus are large series of furnaces with a range of performance options. These are the most popular Rheem and Ruud models.